JDMT 070204R GP15 Carbide Milling Inserts PVD Coated for General Use

JDMT 070204R GP15 Carbide Milling Inserts PVD Coated for General Use

Zoom

Zoom

Our Price:	£2.00
List Price:	~~£3.00~~
Saving Of:	£1.00 (33%)

(Exc. 20% VAT)(£2.40 Inc. VAT)

Model: JDMT070204RGP15
Brand: Uni-tip Carbide

Shipped Weight: 3 g

Availability:

In stock, immediate despatch

In stock, immediate despatch

Uni-tip Carbide

Carbide Inserts with CVD & PVD Coating by Uni-tip

JDMT 070204R GP15, Carbide Inserts for Milling PVD Coated Grade P20, M20, K30 with multi layer TiAlN PVD Coating.

for all types of Steel, Stainless and conditionally Hi-temp Alloys and Cast Iron.

Also suitalbe for Steel, Cast Iron and Hardened Steel up to 55HRC.

Dimensions for JDMT 070204R GP15 (mm)

Cutting Edge Length	Inscribed Circle or Width	Thickness	Hole Dia	Corner Radius	Side Clearance
6.4	4.3	2.45	2.15	0.4	15°

General Cutting parameters

Material	Hardness HB	Cutting Speed VC: m/min	Depth of Cut ap(mm)	Feed f(mm)	Application Choice
Non alloyed steel 0-0.45% C	150-250	90-260 (170)	1-6	0.04-0.09	Good
Low alloyed steel	250-300	70-220 (160)	1-6	0.04-0.09	Good
High alloyed steel	200	70-180 (130)	1-4	0.04-0.07	Good
Corrosion resistant steel	200	70-190 (140)	1-4	0.04-0.07	Good
Stainless - Ferritic	200	60-250 (160)	1-5	0.04-0.07	Good
Stainless - Austenitic	180	60-250 (160)	1-5	0.04-0.07	Good
Stainless - Duplex	230-260	60-130 (100)	1-4	0.04-0.07	OK
Stainless - Martensitic	330	60-250 (160)	1-5	0.04-0.07	OK
Grey cast iron	180-260	60-130 (100)	1-6	0.04-0.09	OK
Spheroidal cast iron	160-260	90-160 (120)	1-6	0.04-0.09	OK
Malleable / Tempered iron	130-230	60-100 (70)	1-5	0.04-0.09	OK
Iron Based Hi-temp Alloys 200-280 HB	200-280	30-50 (40)	1-3	0.04-0.07	OK
Nickel or Cobalt Based 250 HB	250	15-30 (20)	1-3	0.04-0.07	OK
Nickel or Cobalt Based 30-58 HRC	350	15-25 (20)	1-2	0.04-0.07	OK
Hardened Steel	40-50HRC	45-60 (50)	1-2	0.04-0.07	OK

Continue Shopping

Tell a Friend

	Shopping Basket