RPMT 08T2MO-JS M725 Carbide Milling Inserts PVD Coated for Stainless & High Temp Alloy

(Exc. 20% VAT)(£2.40 Inc. VAT)

Model: RPMT08T2MO-JSM725
Brand: APT Carbide

Shipped Weight: 4 g

Availability:

In stock, immediate despatch

APT Carbide

Carbide Inserts APT Brand utilising modern Base Grades, MT-CVD & PVD Coatings and proven Chip Geometries

RPMT 08T2MO-JS M725, Carbide Inserts for Milling PVD Coated Grade M725. S15, M25 with multi layer ZrN PVD Coating.

Main application High Temperature Alloys, Inconel, Titanium Alloys and Stainless Steel under moderate to difficult conditions.

Also suitalbe for Steel, Cast Iron and Hardened Steel up to 55HRC.

Dimensions for RPMT 08T2MO-JS M725 (mm)

Height	Inscribed Circle or Width	Thickness	Hole Dia	Side Clearance
8	8	2.58	3.1	11°

General Cutting parameters

Material	Hardness HB	Cutting Speed VC: m/min	Depth of Cut ap(mm)	Feed f(mm)	Application Choice
Non alloyed steel 0-0.45% C	150-250	90-260 (170)	0.5-4.0	0.10-0.40	Good
Low alloyed steel	250-300	70-220 (160)	0.5-4.0	0.10-0.40	Good
High alloyed steel	200	70-180 (130)	0.5-3.0	0.10-0.30	Good
Stainless - Ferritic	200	70-180 (130)	0.5-2.5	0.10-0.30	Good
Stainless - Austenitic	180	70-200 (140)	0.5-2.5	0.10-0.30	Good
Grey cast iron	180-260	60-130 (100)	0.5-4.0	0.10-0.40	OK
Nodulcast iron	160-260	90-160 (120)	0.5-4.0	0.10-0.40	OK
Malleable / Tempered iron	130-230	60-100 (70)	0.5-3.0	0.10-0.30	OK
HRSA High Temperature Alloys	200-350	30-50 (40)	0.5-2.0	0.10-0.20	OK
Hardened Steel	40-50HRC	45-60 (50)	0.5-2.0	0.10-0.20	OK