APKT 1604 PDTR-76 UM25 Carbide Milling Inserts PVD Coated for Steel & Stainless

Our Price:	£2.00
List Price:	~~£3.00~~
Saving Of:	£1.00 (33%)

(Exc. 20% VAT)(£2.40 Inc. VAT)

Model: APKT1604PDTR76UM25
Brand: Uni-tip Carbide

Shipped Weight: 10 g

Availability:

In stock, immediate despatch

Uni-tip Carbide

Carbide Inserts with CVD & PVD Coating by Uni-tip

APKT 1604 PDTR-76 UM25 Carbide Inserts for Milling PVD Coated Grade UM25. M25, P35, K35 with Multi Layer PVD Coating for all types of Steel, Stainless and conditionally Hi-temp Alloys and Cast Iron.

Dimensions for APKT 1604 PDTR-76 UM25 (mm)

Cutting Edge Length	Inscribed Circle or Width	Thickness	Hole Dia	Corner Radius	Side Clearance
14	9.50	5.35	4.4	0.8	11°

General Cutting parameters

Material	Hardness HB	Cutting Speed VC: m/min	Depth of Cut ap(mm)	Feed f(mm)	Application Choice
Non alloyed steel 0-0.45% C	150-250	90-260 (170)	1-14	0.10-0.20	Good
Low alloyed steel	250-300	70-220 (160)	1-14	0.10-0.20	Good
High alloyed steel	200	70-180 (130)	1-10	0.10-0.18	Good
Corrosion resistant steel	200	70-190 (140)	1-12	0.10-0.18	Good
Stainless - Ferritic	200	70-180 (130)	1-9	0.10-0.18	Good
Stainless - Austenitic	180	70-180 (130)	1-9	0.10-0.18	Good
Stainless - Duplex	230-260	60-130 (100)	1-7	0.10-0.15	OK
Stainless - Martensitic	330	70-180 (130)	1-7	0.10-0.18	OK
Grey cast iron	180-260	60-130 (100)	1-14	0.10-0.20	Optional
Spheroidal cast iron	160-260	90-160 (120)	1-14	0.10-0.20	Optional
Malleable / Tempered iron	130-230	60-100 (70)	1-10	0.10-0.18	Optional
Iron Based Hi-temp Alloys 200-280 HB	200-280	30-50 (40)	1-5	0.10-0.14	OK
Nickel or Cobalt Based 250 HB	250	15-30 (20)	1-5	0.10-0.14	OK
Nickel or Cobalt Based 30-58 HRC	350	15-25 (20)	1-4	0.10-0.14	OK
Hardened Steel	40-50HRC	45-60 (50)	1-4	0.10-0.14	Optional

	Shopping Basket