Home > Carbide End Mills > Corner Radius Mills for Titanium and HRSA 4 Flute AlTiN-ZrN Coated
Model: HRR4-05050050-R0.5Brand: APT Carbide End Mills
Shipped Weight: 55 g
Availability:
In stock, immediate despatch
Carbide End Mills APT Brand
HRR4-05050050-R0.5, 4 Flute Corner Radius Carbide End Mill for Titanum and HRSA 5mm Diameter 0.5mm Corner Radius AlTiN-ZrN Coated 60HRC.
Performs excellent on Titanium Alloys, works well on other HRSA's, Heat Restistant Supper Alloys including Inconel, Cobalt, Nickel and Iron Based Alloys also for 304 and 316 Series Stainless Steel and moderately difficult Stainless,Grey Cast Iron, Soft and Hardened Steels.
Variable Helix with Irregular Flute Spacing for Reduced Vibration and Improved Surface Finish.
Good for materials up to 60HRC.
Helix Angle 38/41° Variable.
Grain Size
HRB2-05050050 2 Flute Ball Nose Carbide End Mill for Titanum and HRSA 5mm Diameter AlTiN-ZrN Coated 60HRC£9.00 £6.00
HRR4-04040050-R0.2 4 Flute Corner Rad End Mill for Titanum and HRSA 4mm Diameter R0.2 AlTiN-ZrN Coated£7.50 £5.00
HRR4-04040050-R0.5 4 Flute Corner Rad End Mill for Titanum and HRSA 4mm Diameter R0.5 AlTiN-ZrN Coated£7.50 £5.00
HRR4-06060050-R0.5 4 Flute Corner Rad End Mill for Titanum and HRSA 6mm Diameter R0.5 AlTiN-ZrN Coated£12.00 £8.00
HRR4-06060050-R1.0 4 Flute Corner Rad End Mill for Titanum and HRSA 6mm Diameter R1.0 AlTiN-ZrN Coated£12.00 £8.00
HRR4-06060050-R1.5 4 Flute Corner Rad End Mill for Titanum and HRSA 6mm Diameter R1.5 AlTiN-ZrN Coated£12.00 £8.00
HRR4-06060075-R0.5 4 Flute Corner Rad End Mill for Titanum and HRSA 6mm Diameter R0.5 75mm Long AlTiN-ZrN Coated£15.00 £10.00
HRR4-08080060-R0.5 4 Flute Corner Rad End Mill for Titanum and HRSA 8mm Diameter R0.5 AlTiN-ZrN Coated£19.50 £13.00
HRR4-10100075-R0.5 4 Flute Corner Rad End Mill for Titanum and HRSA 10mm Diameter R0.5 AlTiN-ZrN Coated£30.00 £20.00
HRS4-05050050 4 Flute Carbide End Mill for Titanum and HRSA 5mm Diameter AlTiN-ZrN Coated 60HRC£9.00 £6.00
Be the first to Write a Review for this item!
