MFR 1.0-D4 L15 XMP Mini Carbide Face Grooving Bar Min Bore 5mm Width 1mm

(Exc. 20% VAT)(£10.80 Inc. VAT)

Model: MFR1.0-D4L15XMP
Brand: APT Tools

Shipped Weight: 55 g

Availability:

In stock, immediate despatch

APT Tools

Tools for Indexable Inserts

MFR 1.0-D4 L15 XMP Mini Carbide Face Grooving Bar Min Bore 5mm Width 1mm.

Min bore 5mm with 15mm reach.

Groove width 1mm by 1.5mm deep.

4mm diameter shank with flat top and bottom for gripping.

Dimensions for MFR 1.0-D4 L15 XMP (mm)

Shank Dia (D)	Min Diameter (d)	Groove Width (B)	Groove Depth (H)	Radius (R)	Reach (L1)	Length (L)
4	5	1.0	1.5	0.05	15	50

General Cutting parameters

Material	Hardness HB	Cutting Speed VC: m/min	Feed mm/rev	Application Choice
Non alloyed steel 0-0.6% C	125-170	25-80 (50)	0.01-0.03	Good
Low alloyed steel	180-350	20-50 (35)	0.01-0.03	Good
High alloyed steel	200-325	20-50 (35)	0.01-0.03	Good
Stainless steel and cast steel	200-330	20-40 (30)	0.01-0.03	Good
Grey Cast Iron	180-260	25-80 (50)	0.01-0.03	Good
Nodular Cast Iron	160-260	25-80 (50)	0.01-0.03	Good
Malleable / Tempered Cast Iron	130-230	20-50 (35)	0.01-0.03	Good
Aluminium Wrought Alloys	60-100	50-120 (85)	0.01-0.03	OK
Aluminium Castings Si<12%	80-90	40-90 (65)	0.01-0.03	OK
Bronze & Brass	90-100	30-75 (55)	0.01-0.03	OK
Plastics	90-100	40-80 (60)	0.01-0.03	OK
Iron, Ni or Co Based Hi-temp Alloys	200-280	10-30 (20)	0.01-0.03	Good
Titanium Alpha + Beta Alloys	1050Rm	10-40 (25)	0.01-0.03	Good
Hardened Steel	45-55HRC	15-40 (25)	0.01-0.03	Good
Hardened Steel	55-60HRC	10-30 (20)	0.01-0.03	OK
Chilled Cast Iron	Cast	10-30 (20)	0.01-0.03	Good
Hardened Cast Iron	Hardened	10-20 (15)	0.01-0.03	OK