PCD Inserts Low Cost
PCD Inserts Low Cost PCD Turning Inserts
Grade PCDA for General Turning and Milling of Aluminium with Silicon content (Si<8%), also suitable for Graphite, Carbon, Plastic Composites, Rubber, Wood, Copper and Bronze Alloys, Zinc. Main properties, good edge quality providing a good surface finish, excellent wear resistance, medium impact strength.
Sold in packs of 2.
Recommended Cutting Conditions - Speeds and Feeds for PCD Inserts.
For Milling and Grooving see the individual product page.
| Material | Recommended Grade | Cutting Speed m/min | Feed mm/rev | Depth of Cut |
| Aluminium Alloys Si<5% | PCD 1300 | 500-3000 | 0.1-0.5 | up to 3mm |
| Aluminium Alloys Si<12% | PCD 1300 | 400-1500 | 0.1-0.5 | up to 3mm |
| Aluminium Alloys Si<18% | PCD 1500 | 300-800 | 0.1-0.3 | up to 3mm |
| Copper, Bronze, Lead Alloys | PCD 1300 | 200-1000 | 0.1-0.3 | up to 3mm |
| Brass, Magnesium, Zinc Alloys | PCD 1300 | 200-2000 | 0.1-0.3 | up to 3mm |
| Composite Plastics | PCD 1300 - PCD 1500 | 200-800 | 0.1-0.3 | up to 2mm |
| Wood | PCD 1300 | 500-3000 | 0.1-0.5 | up to 3mm |
| Graphite, Carbon, Rubber | PCD 1300 | 100-500 | 0.1-0.3 | up to 3mm |
| Metal Matrix Composite | PCD 1500 | 10-30 | 0.1-0.3 | up to 1mm |
| Tungsten Carbide | PCD 1500 | 10-30 | 0.1-0.15 | up to 1mm |
