PTNT 20 NK240 GTN Style Part-off - Parting Insert 2.2mm PVD Coated for Stainless

Our Price:	£4.05
List Price:	~~£6.07~~
Saving Of:	£2.02 (33%)

(Exc. 20% VAT)(£4.86 Inc. VAT)

Model: PTNT20NK240
Brand: APT Carbide

Shipped Weight: 4 g

Availability:

In stock, immediate despatch

APT Carbide

Carbide Inserts APT Brand utilising modern Base Grades, MT-CVD & PVD Coatings and proven Chip Geometries

GTN style Carbide Insert for Parting PVD Coated 2.2mm wide Part–Off Insert in Grade NK240 (M30–P40–K40 + PVD TiAlN Coating) first choice for Stainless also suitable for Steel, Cast & high–temp Alloys.

Competitors marking for similar product GTN 2.

General Cutting parameters for PTNT 20 NK240

Material	Hardness HB	Cutting Speed VC: m/min	Feed f (mm) Per Revolution	Width of Cut ap(mm)
Non alloyed steel 0-0.45% C	150-250	100-190	0.02-0.15	2.1
Low alloyed steel	250-300	80-160	0.02-0.15	2.1
High alloyed steel	200	50-100	0.02-0.12	2.1
Corrosion resistant steel	200	80-150	0.02-0.15	2.1
Stainless - Ferritic	200	100-140	0.02-0.12	2.1
Stainless - Austenitic	180	80-120	0.02-0.12	2.1
Stainless - Martensitic	330	40-70	0.02-0.09	2.1
Grey cast iron	180	100-190	0.08-0.15	2.1
Spheroidal cast iron	160	80-160	0.08-0.12	2.1
Malleable / Tempered iron	130	100-190	0.08-0.15	2.1
Iron Based Hi-temp Alloys	200-280	30-70	0.02-0.10	2.1
Nickel or Cobalt Based 30-58 HRC	-	20-60	0.02-0.10	2.1
Nickel or Cobalt Based 250 HB	250	10-50	0.02-0.09	2.1
Pure Titanium	-	20-30	0.02-0.10	2.1
Titanium Alpha + Beta Alloys	-	20-30	0.02-0.10	2.1

Related Products - Spare Parts

LFMX 200-016 SNSM 8030 GFN Style Parting Off Inserts 2mm Wide PVD Coated for Steel & Stainless~~£12.88~~ £9.02

LFMX 510-20 SNSM 8030 GFN Style Parting Off Inserts 5.1mm Wide PVD Coated for Steel & Stainless~~£16.00~~ £11.20

PTNT 20 P30C GTN Style Part-off - Parting Insert 2.2mm CVD Coated General Use APT~~£6.07~~ £4.05

(10)

PTNT 30 NK240 GTN Style Part-off - Parting Insert 3.1mm PVD Coated for Stainless~~£6.36~~ £4.24

(1)

PTNT 30 P30C GTN Style Part-off - Parting Insert 3.1mm CVD Coated General Use APT~~£6.36~~ £4.24

(5)

PTNT 40 NK240 GTN Style Part-off - Parting Insert 4.1mm PVD Coated for Stainless~~£8.98~~ £5.98

PTNT 50 P30C GTN Style Part-off - Parting Insert 5.1mm CVD Coated General Use APT~~£10.63~~ £7.08

(1)

WDN 20-LM NK240 Parting Off Insert 2mm Left Hand PVD Coated General Use~~£13.08~~ £8.72

WDN 20-NM NK240 Grooving & Parting Off Insert 2mm wide PVD Coated General Use~~£13.08~~ £8.72

WDN 20-SS NK240 Grooving and Parting Insert 2mm wide PVD Coated for Stainless Steel~~£13.08~~ £8.72

Customer Reviews

Average Rating (2 Reviews):

Write a Review and share your opinions!

Rating:

I cut 316 like no before

15 May 2020 | Stefano

I was the first time buying from this. But very happy!

Was this helpful to you? Yes / No

This review has not been appraised.

Rating:

Stainless steel parting

11 October 2016 | Daniel

I've not had much luck with my parting tool in stainless and as a last ditch attempt, before trying other methods, I thought I'd give these a go. Like knife through butter, no chatter, no binding, just let the powered cross feed do the work along with a little cutting fluid. Much impressed.

Was this helpful to you? Yes / No

This review has not been appraised.

	Shopping Basket