External and Internal Carbide Thread Milling Cutter 1/2"x14 NPTF

Zoom

Our Price: £89.00(Exc. 20% VAT)(£106.80 Inc. VAT)

Model: H12108EN14NPTF
Brand: APT Carbide End Mills

Shipped Weight: 160 g

Availability:

Only 3 left in stock - order soon

APT Carbide End Mills

Carbide End Mills APT Brand

External and Internal Carbide Thread Milling Cutter 1/2"x14 NPTF.

NPTF National Pipe Thread Fuel Dry Seal 60° Helical Flute. Dry Seal threads are used for gas and fluid fittings.

Max Thread Depth = 2 x Diameter or less.

Defined by: ANSI B1.20.3-1976.

Tolerance class: Standard NPTF.

For Tapered type Thread.

Made from high quality wear resistant micrograin carbide with special TiAlN-X coating.

Suitable for Steel, Stainless Steel, High Temperature Alloys, Titanium Alloys, Aluminium, Copper and Copper Alloys, Cast Iron and Hardened Steel up to 55HRC.

Details and Dimensions for H12108EN14NPTF (mm)

Thread	TPI	Shank Diameter	Head Diameter
1/2"x14 NPTF	14	12	11.1

Length	Flute Length	Flutes
75	18.1	4

Recommended Speeds and Feeds - Or use software or online calculator for general thread milling and match the tool type.

In the case of persistent tool breakage increase the number of passes or try mini or single tooth cutters.

Entry feed can be ignored for aluminium non-ferrous metals and plastics.

Using more passes will increase machining time but will create smaller chips so recutting chips may be less problematic.

Mild to Alloy Steel <HB180	Mild to Alloy Steel HB180-280	Mild Steel, Alloy Steel HB280-350	Stainless
SS400, SC10C Etc.	S45C, SCM440 Etc.	SNCM439 Etc.	SUS304, SUS316
G6.3 12K Balanced Tools RPM = 3500	G6.3 12K Balanced Tools RPM = 3300	G6.3 12K Balanced Tools RPM = 2800	G6.3 12K Balanced Tools RPM = 2200
G2.5 20K Balanced Tools RPM = 8500	G2.5 20K Balanced Tools RPM = 8500	G2.5 20K Balanced Tools RPM = 8500	G2.5 20K Balanced Tools RPM = 8000
Tool Entry Feed = 30mm/min	Tool Entry Feed = 30mm/min	Tool Entry Feed = 24mm/min	Tool Entry Feed = 24mm/min
Cutting Feed = 100mm/min	Cutting Feed = 100mm/min	Cutting Feed = 80mm/min	Cutting Feed = 80mm/min
Cut in 5-6 passes	Cut in 5-6 passes	Cut in 5-6 passes	Cut in 5-6 passes
Application Choice Good	Application Choice Good	Application Choice Good	OK or use Titanium Series

Grey Cast Iron	Ductile Iron	Aluminium Alloy Si<5%
FC300	FCD450	Plastic, Bronze, Cooper Alloys
G6.3 12K Balanced Tools RPM = 3500	G6.3 12K Balanced Tools RPM = 4200-4800	G6.3 12K Balanced Tools RPM = 4200-4800
G2.5 20K Balanced Tools RPM = 8500	G2.5 20K Balanced Tools RPM = 8500	G2.5 20K Balanced Tools RPM = 8500
Tool Entry Feed = 30mm/min	Tool Entry Feed = 30-36mm/min	Tool Entry Feed = 150-180mm/min
Cutting Feed = 100mm/min	Cutting Feed = 100-120mm/min	Cutting Feed = 150-180mm/min
Cut in 5-6 passes	Cut in 5-6 passes	Cut in 4-5 passes
Application Choice Good	Application Choice Good	OK or use DLC Coated